Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

Wheels Manufacturing Inc. Dropout Saver Kit
$29.99
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    
Wald Wald Training Wheels 10252
$42.99
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wald Wald Training Wheels 1216
$38.99
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
Wald Wald Training Wheels 742
$43.99
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.
Vittoria Pit Stop Tire Sealant
$19.99 - $24.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Trek Water Bottle Trek Logo
$9.99
Key features - All new cap and bottle design for great feel and consistent closure - 100% FDA approved biodegradable plastic - BPA and BPS free - Triple-seal cap provides leak-proof functionality - Soft thermoplastic poppet is easy to open and close - Wide mouth for easy addition of powdered drinks or ice cubes - 2 sizes available : 21oz and 26oz - Manufactured in the USA
Topeak DeFender FX
$19.99
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.
Topeak DeFender RC11 Fender
$29.99
Protect your precious road rocket from wet roads and bad weather with Topeak's DeFender RC11 fender. It uses unique quick-release mounting system that makes installation a snap and it's made from tough, yet light polycarbonate with stainless steel struts for stiffness and durability. There are pivot points that make it compatible with nearly any size bike or tire. The underside is highly polished so grime doesn't stick and, it accommodates tires up to 700 x 25c in size.
Third Eye Eyeglass Mirror
$19.99
- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount
Super B 10-11 Speed Chain Pin Extractor Tool
$35.99
Chain rivet extractor for 10, 11 speed chains. Chain pin guide with 1 spare pin.
Super B Chain Wear Indicator
$15.99
2-in-1 chain wear checker and chain hook function.
Super B Pedal Wrench
$19.99
Great tool for riders and home enthusiasts to remove pedals. 15mm wrench size.
Super B Professional Cable Cutter
$29.99
- 4-in-1 cable cutter - Cuts cables and housing - Crimps cable ends - Crimps housing end caps - Housing end reformer in the handle TB-4575
Skratch Labs Exercise Hydration Mix
$1.99
Skratch Labs’ Exercise Hydration Mix has everything you need and nothing you don’t. To replenish the sodium lost in sweat and keep you hydrated, Skratch uses sodium citrate—an easy-on-the-stomach, high-quality salt. The mix has just the right blend of carbohydrates and salt to keep your fluids in balance and minimize the time it takes your body to hydrate. By quickly replacing the lost salt, you keep your nervous system signaling properly and your muscles firing in sync to produce power with optimal efficiency. Plus, Skratch uses only real fruit and natural ingredients to create a delicious yet mild flavor.
Skratch Labs Sport Hydration Drink Mix
$2.29 - $26.99
Skratch Labs Sport Hydration Mix is a sports drink containing simple sugars, electrolytes, only real fruit for flavor and the right amount of electrolytes to properly replace what’s lost when you sweat.
Serfas Bike Case
$499.99
Serfas' Bike Case tames even the most destructive airline baggage and shipping systems and delivers your bike safe and sound. It features a bulletproof (yes, actually bulletproof) polyethylene case, 2 heavy-duty casters on the end for easy and smooth mobility, 3 layers of foam padding, internal tie-down straps and 4 industrial-strength locking latches for serious security. • Meets UPS Size Requirements • Fits Most Bikes up to 29ers (With Proper Bike Dis-assembly) • Two Heavy Duty Casters for Mobility • Bulletproof Polyethylene Shell • Four Stainless Steel Locking Latches for Ultimate Security • Includes Three Foam Layers and Internal Tie Down Straps • External Size: 47 x 30 x 11-inch • Internal Size: 44 x 27 x 9.75-inch • Weight: 31 lbs
Saris 142x12 Trainer Thru Axle Adapter
$69.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Saris MP1 Nfinity Trainer Platform
$1,399.99 $1,599.99 13% Off
A League of Its Own Since their inception, bike trainers have set out to solve one problem: simulating outdoor riding, indoors. Then came smart trainers and indoor cycling apps, complete with virtual races, group rides and controlled workouts. Suddenly athletes across disciplines were eager to ride indoors. The indoor training renaissance isn’t over. To make the experience even better, and to harness all the benefits riding indoors has to offer, you need a way to stay comfortable and engaged. The MP1 Nfinity Side-to-side movement isn’t new, but it also doesn’t capture the natural movement you experience outdoors. The MP1 with Nfinity technology truly moves the way you do because it adds the fore/aft axis to the equation. The MP1 combines over 20 years of indoor training expertise to not only create the movement platform category – but to perfect it. The result is an unparalleled trainer platform that reimagines the indoor trainer experience altogether. Features Introducing Nfinity Technology In order to bring stationary cycling to life, the MP1 needed movement in multiple axes. The result is an innovative technology combining curves, axes, gravity physics and mechanical ingenuity. The MP1 is the only way to experience this revolutionary technology. Compatible with Nearly Any Bike Trainer If you can experience the freedom of movement indoors, then why limit access with trainer compatibility? We believe that anyone with a bike trainer that fits should be able to tap into the benefits of Saris Nfinity Technology via a ride on the MP1 – which is pretty much everyone. So grab your trainer and check our bike trainer fit guide. Increased Comfort Riding a bike indoors can be uncomfortable because your movement is typically limited by the trainer. Pressure mapping and motion capture technology shows the MP1 significantly alleviates saddle and foot pressure compared to riding a static trainer. Recruit More Muscles It’s true that adding your trainer of choice to the MP1 engages more muscles than a stationary ride. From engaging the upper body to get through sticky spots to activating smaller, key muscles to stay balanced, the MP1 is the only way to recruit large and small muscle groups while riding inside. Adjustable Touch Points The MP1 is compatible with a wide range of setups. Complete with adjustable touch points and well-placed grip tape, the MP1 platform can be used with nearly every indoor bike trainer and training footprint. Looks Good, Too The MP1 looks as good as it moves. The platform deck is made from beautiful birch, while steel sourced from America’s heartland ensures the MP1 can handle the hardest of efforts. For the most cohesive aesthetic, the MP1 is the cornerstone of the Saris trainer eco-system, complete with the trainer desk and smart trainer of choice. It’s Fun, Pure and Simple Our goal was to make the time spent indoors as enjoyable as possible. The movement platform not only enhances the virtual training experience, the MP1 with Nfinity Technology brings indoor training to life. - Nfinity Technology: revolutionary tech that brings movement indoors. - Movement for All: compatible with a variety of training configurations; bikes, desks and nearly every trainer available. - Trailblazing: the MP1 ushers in a type of riding never seen or felt before. - Pure Fun: a responsive, immersive and authentic training experience that’s anything but boring. - Get Comfortable: reduces pressure on touch points so you can put in the miles. - Eye-Catching: mix of steel, aluminum and birch compliment most training spaces. - Personalized Eco-System: put the MP1 at the center with your trainer of choice to create your ideal training station. Specs - Max Fore-Aft Travel: 9.5” - Max Side-to-Side Angle: 6° - Compatible with all major brands and models of bike trainers. - Materials: Steel, aluminum and birch - Weight: 62 lb - Dimensions: 6” tall x 63” long x 35.5” wide - Fully assembled in box - Grip tape strategically placed to assist in walking on the trainer platform. - Tested to the combined weight (rider, bike and trainer) of 350 lb. - Built-in front wheel block for road and MTB.
Saris TD1 Trainer Desk
$449.99
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Saris The Hottie
$249.99 $350.99 29% Off
• Holds 2 bikes, up to 35 lbs. each • Freestanding, small footprint • Cushioned and adjustable bike cradles to protect and accommodate a variety of bike frames
Ryders Eyewear Caliber Standard
$49.99
An evolution of one of our classic performance styles, the adjustability of the new Caliber allows you to customize the fit to your preferences. The wide temple arms provide extra protection, and the lens geometry is optimized for full coverage and a great field of vision.
Ryders Eyewear Crankum antiFOG
$99.99
The Crankum is fully adjustable meaning the nose pads and temple tips can be tuned for a perfect fit. The semi-rim, broken frame design optimizes airflow and reduces weight. Whether you’re grinding through a tight, twisty climb or simply stopped at an intersection, fogged lenses are an inevitability for many of us when wearing sports eyewear. The RYDERS antiFOG lens is the ultimate solution to this all-too-common problem. Lens Technology - Antifog - UV400 - Hydrophobic - Impact Resistant - Optically Correct - Scratch-Resistant Coating Frame Technology - Grilamid TR90 - Hydrophilic Nose Pads + Temple Tips - Adjustable Nose Pads + Temple Tips Specs and Measurements - Fit: Medium - Large - Base Curve: 8C
Ryders Eyewear Face Photochromic
$89.99
Ryders Eyewear calls this model The Face because they're so comfortable you'll think they're part of your face. The TR90 frames certainly lend truth to that notion with extreme flexibility for stellar comfort, not to mention hydrophilic nose pads and temple tips that keep everything in place, even when wet. The lenses feature photochromic technology that adjusts the tint of the lenses to suit ever-changing light levels. They're shatterproof and scratch-resistant, too. More importantly, they're optically correct, which means you get a clear, true view in any direction. Throw in UV protection for even more protection.
Ryders Eyewear Flume antiFOG
$99.99
This high-performance shape is designed to meet the demands of your most challenging adventure. Channeled vents and a unique lens shape provides optimal airflow for fast-moving activities. With hydrophilic nose pads and temple tips, the Flume will stay on your face at all times. Finally, bike eyewear you can leave on your face. Whether you’re grinding through a tight, twisty climb or simply stopped at an intersection, fogged lenses are an inevitability for many of us when wearing sports eyewear. The RYDERS antiFOG lens is the ultimate solution to this all-too-common problem. Lens Technology - UV400 - Hydrophobic - Impact Resistant - Optically Correct - Scratch-Resistant Coating - Antifog Frame Technology - Grilamid TR90 Specs and Measurements - Fit: Medium - Weight: 30g - Base Curve: 8C
Ryders Eyewear Hillroy
$49.99
Similar to a baroque symphony featuring a celebrity DJ, the Hillroy is a classic design with modern upgrades. Despite its casual appearance, the Hillroy comes equipped with anti-slip nose pads and shatterproof lenses, so you can still wear them on the bike.
Ryders Eyewear Jackson
$79.99
Clean lines inspired by time-honored designs, the Jackson is a classic casual shape offering great coverage in a light-weight package.
Ryders Eyewear Nimby
$59.99
The Nimby features a lightweight, rimless design with a shield lens for an unobstructed field of vision. Designed to meet the demands of cyclists, the angle of the lenses and the resulting airflow can be customized by adjusting the nose pads.
Ryders Eyewear Pace
$49.99 - $59.99
Driven by the needs of cyclists, the Pace’s lightweight, rimless design ensures that there’s no frame to obstruct your view while in your riding position. The adjustable hydrophilic nose pads and temple tips allow you to fine-tune the fit to optimize airflow, stability and comfort.
Ryders Eyewear Saber
$59.99
A minimalist version of the ever-popular Strider, the Saber offers the same lens coverage and the same hydrophilic, adjustable nose pads in a very lightweight design.
Ryders Eyewear Seventh Standard
$49.99 - $59.99
The most stylish, sport semi-rim out there, the Seventh has a flat top to give it a more casual appearance than its more aggressive-looking peers. And it does this without sacrificing the performance benefits that make semi rims so popular for athletic endeavours. In fact, the Seventh performs better than many frames out there because of its fully-adjustable, hydrophilic nose pads and temple tips that allow you to custom fit the frame to suit your face, your helmet and the desired amount of airflow behind the lens. Impact resistant and optically correct, these lenses provide 100% protection from UVA, UVB and UVC rays as well as harmful, high energy light to 400nm. As if that’s not enough, they also have premium hydrophobic and scratch-resistant coatings. This is the standard from which we build all of our more technical lenses, so every Ryders lens has the same technology at its core and the highest standard of quality. Lens Technology - UV400 - Hydrophobic - Impact Resistant - Optically Correct - Scratch-Resistant Coating Frame Technology - Grilamid TR90 - Hydrophilic Nose Pads + Temple Tips - Adjustable Nose Pads + Temple Tips Specs and Measurements - Fit: Medium - Large - Weight: 30g - Base Curve: 8C
Page 1 of 7 Next page