Filter By:
- Bar Ends (2)
- Bottom Brackets (17)
- Brakes/Levers/Pads (52)
- Cables (17)
- Cassettes/Freewheels (25)
- Chainrings (8)
- Chains (31)
- Cranksets (15)
- Show More Categories
- Derailleurs (40)
- Forks (1)
- Groups (1)
- Handlebar Grips/Tape (30)
- Handlebars (12)
- Headsets (2)
- Pedals (42)
- Saddles (25)
- Seatposts (10)
- Shift/Brake Combinations (6)
- Shifters (16)
- Stems (13)
- Other (45)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$19.99
- Christophe Vintage leather strap
- Celebrating 130 years of history
- 370mm long
- Metal buckle

$29.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
$159.99
Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

$189.99
T47 threaded BB cups for running 24mm spindle (Shimano, etc.) cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

$44.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$69.99
TruVativ's AKA Stem is 3D forged from 7050 aluminum for durable strength in all conditions. Four bolts attach the faceplate for a vise-like grip on your bars, and the 2-bolt clamp secures to your steerer for pinpoint steering precision and stiffness. This stem perfectly balances weight and strength for your trail or all mountain bike.

$35.99
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks.
• Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks
• Crank bolts are included

$69.99
Genuine replacement parts
Get your bike back on the road with new chainrings
Replacement chainring for your Bosch Gen 2 equipped bike
- Bosch Generation 2 specific steel chain rings
- 3mm offset Boost compatible
-Direct Mount

$31.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 130mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$25.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 142x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$10.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have.
Product details
- Designed for use on kids' bikes without shifters
- Set of two grips
Specifications
- Length: 107mm
- Diameter: 22.2mm
- End Type: Closed
- Lock-on: No
- Material: Kraton Rubber

$9.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have.
Product details
- Designed for use on kids' bikes with twist shifters
- Set of two grips
Specifications
- Diameter: 22.2mm
- End Type: Closed
- Lock-on: No
- Material: Kraton Rubber

$74.99
Platform pedals with a durable nylon design and replaceable pins for consistent grip.
Confident and durable
From enduro to dirt jumpers, many riders prefer flat pedals, but no matter where you ride, you'll appreciate the benefits of the Line Elite MTB pedal. It features a rugged nylon body and virtual concave platform with replaceable traction pins, so every time you place your foot your shoe stays put.
And because long-lasting performance matters, they're built with durable axle and sealed cartridge bearings that hold up to impacts and pedal strikes.
Product details:
- Durable nylon body with a proven shape for comfort and confidence
- Virtual concave design with pin placement secures your shoe for pedaling and descending
- Durable axle spins on sealed cartridge bearings
- Replaceable steel traction pins
- Install with 8mm hex wrench
Features:
Virtual concave design
The steel pin placement on the durable nylon body creates a virtual concave design to securely grip any shoe.
Easy maintenance
The steel traction pins are replaceable and a rebuild kit is available to keep your pedals spinning.
Threading: 9/16" (15mm)

$204.99
Trek-compatible seat mast cap
Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately.
Key features:
- Ultra-light carbon construction
- One bolt head design offers easy fore-aft and infinite angle adjustment
- Compatible with all Trek road bikes with round seat masts
- 175mm and 135mm lengths
- 5mm and 20mm offsets
- Aluminum clamp
$25.99
Allows use of two Blendr mounts on a Trek Madone SLR.
Genuine replacement parts
Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike.
Product details
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Trek Madone SLR Aero Integrated handlebar
- Add any accessory mount (sold separately) for an elegant, integrated look
- Includes mounting hardware

$52.99
- Optimum heat dissipation
- High durability
- Wear indicators
- 1.95mm thick
- Rounded edge
- UCI approved
- Hub Compatibility: ISO 6B
- Disc Pad Type: Metal or Resin
- Material: Steel

$32.99
Characteristics:
- long lasting, high endurance pad compound
- very easy modulation of braking force
- high temperature stability for consistent brake power
- organic formula is low noise and rotor friendly
Fits:
Shimano:
- Dura Ace BR-R9170
- Ultegra BR-R8070
- XTR BR-M9100
- BR-RS805
- BR-RS505
- BR-RS405
- BR-RS305
Tektro:
- HD-R310
- REVER
- MCX1 Flat Mount

$72.99
The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups.
- Cage is optimized for disc brake road bikes
- Integrated cable tension adjustment for precise and easy adjustments
- More frame cable routing options

$74.99 - $105.99
- Shimano 105 R7000 Series CS-R7000 11-speed cassette
- Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T)
Combinations:
- 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T
- 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T
- 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T
- 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T

$99.99
Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending.
- Maximum cog size: 30t (SS) / 34t (GS)
- Total capacity: 35t (SS) / 39t (GS)
- Pulleys: 11t
- Chain compatibility: HG-EV 11-speed/HG-X11
- Direct mount compatible

$74.99
Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

$59.99 - $69.99
The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display.
- Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference
- The optical gear display tells you which gear position is selected while riding
- Compatible with V-Brake, Mechanical disc brake (MTB)

$49.99 - $59.99
- MODEL NO: CS-HG400-9
- SERIES: SHIMANO ALIVIO M4000 Series
- Compatible chain: HG 9-speed
- Speeds: 9-speed
- Type: HG

$65.99
Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset.
- High-quality anodized finish
- Precise and reliable shifting

$69.99
- Alivio M3100 series shifters
- 2x9 and 3x9 options enable a variety of riding styles
- 2-speed front shifter uses single-paddle Rapidfire Plus Mono technology for the most simple & intuitive front shifting
- Rapidfire Plus rear shifter mechanism allows up to 3 downshifts at once
- Easy to read optical gear display
- Optislick cables included
- Pairs of shifters also include SP-41 cable housing

$32.99
• 107mm arch for better clearance with mud guard
• Updated rubber boots secure attachment to lead pipe
• Strong braking power with excellent braking control
• Cartridge shoe holder
• Color options: Black, Silver

$45.99
Shimano Altus M2000 Series 9-speed cassette.
Combinations:
- 11 – 32T: 11-13-15-17-19-21-24-28-32T (bo)
- 11 – 34T: 11-13-15-17-20-23-26-30-34T (bn)
- 11 – 36T: 11-13-15-17-20-23-26-30-36T (bw)

$79.99
Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands.
- The brake lever's versatile design matches numerous bike styles
- Braking power is adjusted for entry-level riders
- Pre-bled brakes for easy, quick, and clean installation
Page 1 of 14
Next page